From: Neil Golden (nmgF95@hampshire.edu)
Date: Fri 23 Feb 2001 - 20:24:06 IST
What is my problem? besides being a newbie, that is.
On a virtually untouched Redhat 7 installation, I get this message when
trying to compile 1.9.5:
/usr/local/src/svgalib-1.9.5/src/keyboard/keyboard.c: In function
`keyboard_getevents':
/usr/local/src/svgalib-1.9.5/src/keyboard/keyboard.c:496: malformed
floating constant
/usr/local/src/svgalib-1.9.5/src/keyboard/keyboard.c:496: case label does
not reduce to an integer constant
make[1]: *** [keyboard/keyboard.o] Error 1
make[1]: Leaving directory `/usr/local/src/svgalib-1.9.5/sharedlib'
make: *** [sharedlib/libvga.so.1.9.5] Error 2
[root@localhost svgalib-1.9.5]#
I get the exact same message when trying to install svgalib-1.4.2.
The following are the contents of my Makefile.cfg file. I know I must be
making a newbie mistake, but I don't know what it is. I would be very
grateful if you could point me in the right direction! Thank you.
Neil Golden
nmgF95@hampshire.edu
#----------------------------------------------------------------------
# SVGAlib Compile-time configuration file
#----------------------------------------------------------------------
# If you change ANYTHING in here you MUST 'make clean' and remake what
# you need.
#
# BEWARE! The toggle settings (INCLUDE_*_DRIVER and such) are set when
# the symbols are set. The value is pointless. Even setting a variable
# to n means yes!
MAJOR_VER = 1
MINOR_VER = 9.5
VERSION = $(MAJOR_VER).$(MINOR_VER)
#----------------------------------------------------------------------
# Configuration Section
#----------------------------------------------------------------------
# Source directory.
#srcdir = /usr/local/src/svgalib-$(VERSION)
srcdir = $(shell sh -c pwd)
confdir = $(srcdir)/src/config
# Common prefix for installation directories.
# NOTE: This directory must exist when you start the install.
TOPDIR=
prefix = $(TOPDIR)/usr/local
exec_prefix = $(prefix)
# Directory where the shared stubs and static library will be installed.
libdir = $(exec_prefix)/lib
# Directory where the shared library will be installed.
sharedlibdir = $(exec_prefix)/lib
# Directory where the font and textmode utilities will be installed.
bindir = $(exec_prefix)/bin
# Directory where the run-time configuration files will be installed.
datadir = $(TOPDIR)/etc/vga
# Directory where the header files will be installed.
includedir = $(prefix)/include
# Directory where the man files will be installed.
mandir = $(prefix)/man
# Target binary format.
# TARGET_FORMAT = a.out
TARGET_FORMAT = elf
# uncomment any of the following line to print some debug messages
# DEBUG = yes
DEBUG_CONFIG = yes
# DEBUG_ACCEL = yes
# DEBUG_KEYBOARD = yes
# uncomment this if your compiler fails on compiling the assembler in
# src/vgaconvplanar.c, gl/inlstring.h, gl/line.c or gl/scale.c
NO_ASM = y
# uncomment if you want to set attribute controller and dac without delay
# This breaks original VGA, but seems to work on new cards.
NO_DELAY = y
# Uncomment this if you want root processes to be able to always get a new
# VC. Alas, some games misuse suid root privs and become root, svgalib
cannot
# detect this and will allow Joe blow user to open a new virtual VC. If
this
# annoys you, comment out the next line (which is the default already)
ROOT_VC_SHORTCUT = y
# Uncomment this if you want to compile and install the static libs.
# INSTALLSTATICLIB = installstaticlib
# Comment this out if you don't want to install the shared libs.
# If you do not install the shared nor the static libs, 'make static'
# first to enforce just building the static lib, then the demos will
# use this local static library!
INSTALLSHAREDLIB = installsharedlib
# In case your TARGET_FORMAT is elf and if a pre-compiled shared library
# a.out image is available install it in the first directory named
something
# like *aout/ in /etc/ld.so.conf.
# If you want this, do not comment out the next line:
INSTALLAOUTLIB = installaoutcompat
# Comment this out if you want to keep old shared images. Old header
files,
# library stubs and static libraries CANNOT be kept in public locations
# except when you rename them yourself.
# KEEPSHAREDLIBS = keep
# Comment this out if you don't want to compile and install the utilities.
INSTALLUTILS = installutils
# Comment this out if you don't want to install the man pages by default
INSTALLMAN = installman
# Remove the '# ' from one of the next two lines if you want to install
the
# man pages compressed (with gzip) or not. If you comment out both lines,
# the Makefiles will try to figure out if your system supports gzipped man
# pages and install them when possible.
# MANFORMAT = compressed
# MANFORMAT = uncompressed
# This is the command to update the man pages whatis database.
# This is a slow command. If you are not very patient, simple
# comment out this line
# MAKEWHATIS = makewhatis # Beware, this will really need a few minutes!
#
# Comment out any driver that you don't want included in the library.
#
#INCLUDE_ET4000_DRIVER = y
INCLUDE_CIRRUS_DRIVER = y
INCLUDE_TVGA_DRIVER = y
#INCLUDE_OAK_DRIVER = y
#INCLUDE_EGA_DRIVER = y
#INCLUDE_MACH32_DRIVER = y
INCLUDE_S3_DRIVER = y
#INCLUDE_ET3000_DRIVER = y
#INCLUDE_GVGA6400_DRIVER = y
#INCLUDE_ARK_DRIVER = y
#INCLUDE_ATI_DRIVER = y
#INCLUDE_ALI_DRIVER = y
#INCLUDE_CHIPS_DRIVER = y
INCLUDE_APM_DRIVER = y
INCLUDE_NV3_DRIVER = y
INCLUDE_ET6000_DRIVER = y
INCLUDE_VESA_DRIVER = y
INCLUDE_MX_DRIVER = y
INCLUDE_PARADISE_DRIVER = y
INCLUDE_RAGE_DRIVER = y
INCLUDE_BANSHEE_DRIVER = y
INCLUDE_SIS_DRIVER = y
INCLUDE_I740_DRIVER = y
INCLUDE_NEO_DRIVER = y
#
# Comment out any adapter you don't want to autodetect.
#
#INCLUDE_ET4000_DRIVER_TEST = y
INCLUDE_CIRRUS_DRIVER_TEST = y
INCLUDE_TVGA_DRIVER_TEST = y
#INCLUDE_OAK_DRIVER_TEST = y
#INCLUDE_EGA_DRIVER_TEST = y
INCLUDE_MACH32_DRIVER_TEST = y
#INCLUDE_GVGA6400_DRIVER_TEST = y
INCLUDE_S3_DRIVER_TEST = y
#INCLUDE_ET3000_DRIVER_TEST = y
#INCLUDE_ARK_DRIVER_TEST = y
#INCLUDE_ATI_DRIVER_TEST = y
#INCLUDE_ALI_DRIVER_TEST = y
INCLUDE_CHIPS_DRIVER_TEST = y
INCLUDE_APM_DRIVER_TEST = y
INCLUDE_NV3_DRIVER_TEST = y
INCLUDE_ET6000_DRIVER_TEST = y
INCLUDE_MX_DRIVER_TEST = y
INCLUDE_PARADISE_DRIVER_TEST = y
INCLUDE_RAGE_DRIVER_TEST = y
INCLUDE_BANSHEE_DRIVER_TEST = y
INCLUDE_SIS_DRIVER_TEST = y
INCLUDE_I740_DRIVER_TEST = y
INCLUDE_NEO_DRIVER_TEST = y
#Might be too dangerous:
INCLUDE_VESA_DRIVER_TEST = y
#
# Comment out any dac support that you don't want included in the library.
#
INCLUDE_NORMAL_DAC = y
INCLUDE_S3_SDAC_DAC = y
INCLUDE_S3_GENDAC_DAC = y
INCLUDE_S3_TRIO64_DAC = y
INCLUDE_SIERRA_DAC = y
INCLUDE_SC15025_DAC = y
INCLUDE_ATT20C490_DAC = y
INCLUDE_ATT20C498_DAC = y
INCLUDE_ICW_DAC = y
INCLUDE_IBMRGB52x_DAC = y
INCLUDE_SC1148X_DAC = y
#
# Comment out any dac you don't want to autodetect.
# (not all dacs can be autodetected, at this time)
#
INCLUDE_S3_SDAC_DAC_TEST = y
INCLUDE_S3_GENDAC_DAC_TEST = y
INCLUDE_SC15025_DAC_TEST = y
INCLUDE_ATT20C490_DAC_TEST = y
INCLUDE_IBMRGB52x_DAC_TEST = y
INCLUDE_SC1148X_DAC_TEST = y
# Location of the svgalib configuration file.
SVGALIB_CONFIG_FILE = $(datadir)/libvga.config
# Defining DYNAMIC enables runtime parsing of the file defined by
# ET4000_REGS (usually /etc/libvga.et4000) for the et4000
# driver. See et4000/README for details. Commenting this out again
# saves binary space.
#
# If you just want to use the et4000.regs in the source directory,
# comment out the definition of DYNAMIC. DYNAMIC allows development of
new
# resolutions without recompiling.
DYNAMIC = y
ET4000_REGS = $(datadir)/libvga.et4000
# The EGA driver may load additional modes (SuperEGA cards) like the
# et4000 driver does. Just define the configuration file below.
# [This should be taken with a grain of salt, EGA is untested.]
#EGA_REGS = $(datadir)/libvga.ega
# Defining USE_CLOCKS will cause the ET4000 driver to measure clock
# frequencies (they are not actually used yet).
#USE_CLOCKS = y
# Uncomment to allow mouse type overrides
ALLOW_MOUSE_OVERRIDE = y
#----------------------------------------------------------------------
# Compiler Section
#----------------------------------------------------------------------
# Compiler used.
PC = ppc386
ifndef CC
CC = gcc
# CC = i686-pc-linux-gnu-gcc
# CC = gcc -b i486-linuxaout
# CC = gcc -b i486-linux
endif
ifndef CFLAGS
OPTIMIZE = -fomit-frame-pointer -O2 -fno-strength-reduce -pipe -g
else
OPTIMIZE := $(CFLAGS)
endif
# You might want to add -m386 here if you have a recently installed
# (486 configured) compiler on a 386. The only real difference is the
# generous alignment padding of function entry-points for the 486.
WARN = -Wall -Wstrict-prototypes
INCLUDES = -I$(srcdir)/include -I.
CFLAGS = $(WARN) $(DLLFLAGS) $(INCLUDES) $(OPTIMIZE) $(DEFINES)
# ELF doesn't like -N. It is beneficial for small tools with a.out
ifeq (a.out, $(TARGET_FORMAT))
LDFLAGS = -N -s
else
LDFLAGS = -s
endif
# Uncomment the following if you are compiling a.out shared libraries
# with an ELF ld.
#
#MKIMAGEFLAGS = -m i386linux -oformat a.out-i386-linux -qmagic
# additional flags for shared lib.
ifeq (a.out, $(TARGET_FORMAT))
DLLFLAGS = -B/usr/dll/jump/
else
DLLFLAGS = -fPIC
endif
# Utilites used.
AR = ar
INSTALL_PROGRAM = install -c -s -m 755 -o root -g bin
INSTALL_SHLIB = install -c -m 755 -o root -g bin
INSTALL_DATA = install -c -m 644 -o root -g bin
------------------------------------------------------------------
Unsubscribe: To: listbot@svgalib.org
Body: unsubscribe linux-svgalib
This archive was generated by hypermail 2.1.4 : Wed 21 Jan 2004 - 22:10:23 IST